Time:2025-10-17
Views:42

A flat ribbon cable is just a row of parallel conductors bonded side by side and colour-coded. It terminates in seconds with IDC connectors, and that’s basically why it’s everywhere inside equipment. Specifying one comes down to three numbers: pitch, gauge and conductor count. Get those right and the cable fits first time.
Pitch: the spacing that must match the connector
Ribbon cable pitch is the centre-to-centre spacing between conductors. 2.54 mm (0.1″) is the IDC standard, and 1.27 mm shows up for higher-density runs. The cable pitch has to match the connector pitch exactly. A 1.27 mm cable won’t terminate cleanly in a 2.54 mm IDC socket.
AWG: thinner for signals, thicker for power
Gauge follows the job. 28 AWG is the ribbon default for signals. Step up to 26 or 24 AWG when the cable carries power or runs long. Thinner saves space and flexes better; thicker drops less voltage. The UL2468 style, tinned and PVC-insulated and rated 300 V, covers most appliance and data jobs.
Conductor count and colour
Ribbon cable is bought by the number of ways: 10, 16, 40, 64 and so on. The classic grey cable has a red edge stripe marking pin 1. Rainbow ribbon colour-codes every conductor, which makes wiring mistakes a lot harder. Pick the count to match your header, and the colour to match how much you trust your assembly line.
Where a ribbon cable really saves you money is as a finished assembly: cable, IDC sockets and strain relief, terminated and tested in one place. We build custom flat-cable and ribbon assemblies in our Shenzhen factory, any pitch, gauge, count and length. You get a tested harness instead of a reel and a bag of connectors.
Frequently Asked Questions
What pitch is standard ribbon cable?
2.54 mm (0.1 inch) is the IDC standard, with 1.27 mm for denser runs. It has to match the connector pitch.
What is UL2468?
A common tinned, PVC-insulated ribbon style rated to 300 V. Used a lot for appliance and data wiring.
Can you supply a finished assembly?
Yes. Cable, IDC sockets and strain relief, terminated and tested in our factory, delivered as a finished harness.




