News
News
Contact Us
Home > Industry information

RJ45 vs RJ11 Connector: What's the Difference and Which Do You Need?

Time:2025-06-27 Views:37
RJ45 vs RJ11 Connector: What's the Difference and Which Do You Need?
RJ45 and RJ11 look almost identical. Both are clear-plastic modular plugs with a little gold contact strip and a spring clip, and that resemblance is exactly why people grab the wrong one. The differences are simple once you see them. Get it wrong and it won’t just fail to fit, it’ll force a rework.

Pin count is the whole story

RJ45 is 8P8C, eight positions, eight contacts. It’s the Ethernet jack you plug a network cable into, and the bigger body accommodates all eight. RJ11 is 6P4C, six positions, four contacts, and it’s the telephone jack, physically narrower. An RJ11 plug can physically enter an RJ45 jack, it just sits loose and connects nothing useful, which is the classic mistake.

Shielding: when the cable says STP

Plain RJ45 works fine for short, quiet runs. The moment your cable is shielded (STP/FTP) or you’re running near motors and drives, you want a shielded RJ45 with a metal shell that bonds the cable’s shield to chassis ground. That’s the difference between a clean link and intermittent packets.

Integrated magnetics: the quiet upgrade

Most boards put the Ethernet transformer (magnetics) inside the jack itself, an RJ45 with integrated magnetics. It saves board space, cuts EMI and simplifies the PHY design. If your schematic shows a separate transformer, a magjack is the tidy drop-in.

The short version

FeatureRJ45RJ11
Contacts8P8C6P4C
Typical useEthernet, PoETelephone, fax
Shielded optionYes (STP/FTP)Rarely
Magnetics optionYesNo
The decision rule is blunt: Ethernet or anything networked → RJ45; a single analogue phone or fax line → RJ11. We stock both families, including shielded RJ45 and magjacks, from our Shenzhen factory, with the pin-out and plating options your design already specifies.
If your panel or PCB has a non-standard cutout, we also do custom jacks. Send the drawing and we’ll match it.

Frequently Asked Questions

Can I plug an RJ11 into an RJ45 jack?

Physically yes, but it won’t make a proper connection and it can damage the outer pins of the jack. Use the connector that matches your cable.

What does 8P8C mean?

Eight positions, eight contacts. That’s the full eight-conductor layout used by RJ45 Ethernet connectors.

Do you offer RJ45 with integrated magnetics?

Yes. We supply magjacks with the transformer built in, which saves board space and simplifies your PHY design.