Products
Products
Contact Us
Home > Terminal Block > 3.81mm Screw 6-Pole Blue Terminal Block...
2.54mm Screw-Type 4-Pole Female Green Terminal Block
  • 2.54mm Screw-Type 4-Pole Female Green Terminal Block

2.54mm Screw-Type 4-Pole Female Green Terminal Block

Pitch: 2.54 mm
Poles: 4
Gender: Female
Color: Green
Rated current: 3.0 A (typical)
Rated voltage: 250 V AC (typical)
Contact resistance: 20 mΩ max
Insulation resistance: 100 MΩ min
Withstand voltage: 2500 V AC (typical)
Operating temperature: -40 °C to +105 °C (typical)

    A green socket with four ways

    Four positions at 2.54 mm in a green female housing is a control socket that reads clearly on a crowded board. Female means the mating pins come from the plug side, so the board half takes the bare contacts and the harness arrives with the sockets. The screw termination at the wire end holds each conductor on its own. Green is the circuit cue: on a panel that also carries a white or a blue block, the colour separates the low current control group before anyone reads a label.

    Colour as a wiring instruction

    A 3.0 A typical rating at 250 V AC typical comes with 20 mΩ max contact resistance, around 0.18 W dissipated at each pole under full load. Insulation resistance is 100 MΩ min and the dielectric check is 2500 V AC typical. The operating range is -40 °C to +105 °C typical. Colour does not change any of those numbers; it changes how fast a person finds the right socket. Keep the green housing matched to the green plug so the visual cue survives the mate.

    Fit check before the release

    Small free samples of the housing cover a fit check against your mating pins and the wire gauge you plan to land. That check usually catches a plug body that will not clear a nearby component. After sign off, production runs leave in eight working days on stock counts, with position one marked on the green body. If you need the same four way circuit in a different colour for identification, we can run it in the same tooling without a footprint change.

    We are a connector factory in Shenzhen, not a trading middleman, so what you get is factory-direct pricing and an actual engineer looking at your project.

    Standard connectors start at 100 pieces and leave in about 8 business days. Custom parts and harnesses run from 50 pieces. Want to test first? We send free samples of standard items, and for custom work we make a prototype in 1 to 2 days and knock the setup fee off your first order.

    Payment is T/T (50% deposit, 50% before shipping), L/C, PayPal or credit card. Send a drawing, a photo, or just a part number from another brand and we will get back to you with a quote and a free DFM check within a few hours.

    *

    *

    *

    *

Related products